Load Sheets

Load Sheets

Load sheets (Mass Management)

Prestart features loadsheets to record axle group weights. Trucks and trailers require GML and other applicable mass limits configured in Gearbox before loadsheet can be entered in Prestart.



Recent loadsheets can be viewed before starting a New Load Sheet.



Mass Scheme, Location & Trailers




Start by selecting a Mass Scheme (GML, CML, HML). Enter from / to or other information in the location field.



Prestart will also alert you if a vehicle or trailer has not been configured for CML, HML or other schemes. Contact your Gearbox administrator if you are unble to proceed. Click Save to continue.

Entering Axle Group Weights

Enter the Steer and Drive Axles for the Truck and Trailer axle group weights. Prestart will turn an axle weight group limit red to identify an overload.



Gearbox will also identify a GCM overload. Click save to complete the load sheet.  If you have an overload, contact your supervisor.



    • Related Articles

    • Prestart User Guide (Download)

      Click on the attachement below to download the Prestart User Guide in PDF (1.7 MB).
    • Getting started with Prestart

      Logging Into Prestart Enter your login number (typically your mobile number and) your six (6) digit pin provided by your Gearbox administrator. Prestart is not to be used while driving or operating equipment. Agree with the warning to continue. Main ...
    • Flag Fault as resolved on Prestart

      With the release of Prestart v1.5.1 users will be able to mark a Fault as resolved by following the steps outline below. Note: In order for a Prestart user to mark a Fault as resolved, the Flag Fault Reports as fixed permission must be enabled on ...
    • Syncing Prestart

      Overview Prestart automatically uploads all data (Prestarts, Faults etc) to Gearbox as soon as the checklist or form is completed. Prestart can be still used offline when internet access is not available. Users are notified with the following message ...
    • Fuel

      Fuel Fuel can also be recorded in Prestart. Recent records are displayed after clicking on the Fuel icon. Add all available information and click save to upload the information to Gearbox.